Did you know that Puzzle Place has a forum where you can talk about puzzles with other puzzlers?
VISIT FORUM

Quads And Rings One

From Puzzle Place
Jump to: navigation, search
Quads And Rings One 1.jpg
Quads And Rings One by Eric Fuller
Photo courtesy of Cubic Dissection
Name
Quads And Rings One
Limited to
38
Manufacturer
Dimensions
~1.5 x 1.5 x 1.5"
Year
2013
Cost
$17
Availability
Not Available
# of Pieces
6
Burr Level
13.5
Material
Bloodwood, Ash, Acrylic
Objective
Assemble the 6 pieces into the shape shown

"I noticed a lot of interesting board and stick burrs coming out on Ishino's site so I decided to make batch of them. After looking at a couple dozen designs I chose six for their representation of the various concepts and levels of difficulty. Believe it or not, this is the simpler iteration of the Quads and Rings series. Four wooden burr pieces interlock with two acrylic pieces with a level 13.5 solution. Doable despite the high level because a lot of the moves just follow. Achieving the checkerboard pattern is a second challenge. Construction is excellent, with close tolerances but plenty of room to maneuver." -Eric Fuller